b43 еще требует наличия файла firmware (если я не путаю с b44...)
Не путаешь. b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version.
Please carefully read all instructions on this website.
b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version.
Please carefully read all instructions on this website.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version.
Please carefully read all instructions on this website.
b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version.
Please carefully read all instructions on this website.
От Lupu точно ничего не подходит, но и самосборное не работает :(
Вывод dmesg
[b43-pci-bridge 0000:00:06.0: enabling device (0004 -> 0006)
b43-pci-bridge 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
wlan0 появляется только после добавления модуля b43, но сеть не сканирует.
Инструкция (en) (http://www.broadcom.com/docs/linux_sta/README.txt)
Но ставиться не хочет. # depmod
WARNING: Couldn't find symtab and strtab in module /lib/modules/2.6.35.8/kernel/net/wireless/wl.ko.gz