Скачал 2 архива:
iscan-2.26.3-i486.tar.gz и
iscan-data-1.8.1-i486.tar.gzраспаковал в корень системы, командой dir2pet сделал пакеты. (я не уверен в правильности действий, если не затруднит делайте сразу pet
)
Установил пакеты, запустил iscan
получил сообщение :
Could not send command to scanner.
Check the scanner's status
Не мог послать команду в сканер.
Проверьте статус сканера
По пробовал выполнить действия из описания драйвера (файл Epson.txt)
вот что получил:
# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 04b8:012d
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x012d [EPSON Scanner]) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
# adduser uellue scanner
BusyBox v1.17.4 (2011-01-27 17:39:24 YAKT) multi-call binary.
Usage: adduser [OPTIONS] USER
Add a user
Options:
-h DIR Home directory
-g GECOS GECOS field
-s SHELL Login shell
-G GRP Add user to existing group
-S Create a system user
-D Don't assign a password
-H Don't create home directory
-u UID User id
# /etc/init.d/udev restart
bash: /etc/init.d/udev: Нет такого файла или каталога
на этом пока застопорился