Привет уважаемые форумчане:-)
У меня таже проблема.
Помогите разобраться, у меня туго с английским, но все же, что-то понимаю.
Выписка из readme по установке драйвера:
Important:
==========
a.) Must have administrator access rights on the Linux machine to
install the Elo Touchscreen USB Driver.
b.) Ensure all earlier Elo drivers are uninstalled from the system.
c.) The Elo Touchscreen driver components now require new libusb-1.0
library support (older libusb-0.1 library will not work). Most
newer Linux distributions have started shipping this library
(update to the popular libusb-0.1 library) as a part of their
standard release. Customers can also download and compile the
libusb-1.0 library from source (requires gcc v4.0.0 or later)
available at libusb website. This driver will NOT work with
the older libusb-0.1 library.
d.) Do not extract the downloaded binary package on a Windows system.
e.) Motif 3.0 (libXm.so.3) or 4.0 (libXm.so.4) library is required to
use the Graphic User Interface (GUI) based control panel
(/etc/opt/elo-usb/cpl). Openmotif or lesstif installation packages
provide the required libXm.so.3 or libXm.so.4 library.
Всем ли перечисленным требованиям отвечает сборка puppyrus snowdog 2.0
2.6.35.10 1 SMP PREEMPT SUN DEC 19?
Libusb-1.0.8. поставил из пет пакета(который скачал с помощью гугла - установщик пакетов его не качает не с одного зеркала)
Интересует больше вопрос под буквой "e.)"!!!
Есть ли такая штука в этом папике? Если нет то где можно ее найти?
Или сборку какую посоветуете, только в ней должна быть поддержка wpa/psk2. В этой версии папика есть. У меня в суде киоски на вайфае висят(cisco).
К убунте обращаться не хочу, хочу с папиком дружить:-)
Надеюсь поможете.