Не отключайте рекламу на сайте - поможете проектуx86_64: LFD10-23.05 ; Roll24.02-24.04 ; LFU22 ; FAS ; Alt-Club-lxde3 i686: DDR01-21.08 Русские PuppyLinux
0 Пользователей и 1 Гость просматривают эту тему.
#Special base config file used in Puppy Linux.# **********************************************************************# Module section -- this section is used to specify# which dynamically loadable modules to load.# **********************************************************************#Section "Module"# This loads the DBE extension module. Load "dbe" # Double buffer extension# This loads the miscellaneous extensions module, and disables# initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection# This loads the font modules# Load "type1" Load "freetype"# This loads xtrap extension, used by xrandr Load "xtrap"# This loads the GLX module (if present). xorg 7.4/5 need explicit disable to disable... Disable "glx" #LOADGLX# This loads dri module (if present). 7.4 loads it by default, have to disable...# Load "dri" #LOADDRI Disable "dri"EndSection# **********************************************************************# Files section. This allows default font paths to be set# **********************************************************************
# Multiple FontPath entries are allowed (which are concatenated together),# as well as specifying multiple comma-separated entries in one FontPath# command (or a combination of both methods) FontPath "/usr/share/X11/fonts/misc/" FontPath "/usr/share/X11/fonts/Type1/" FontPath "/usr/share/X11/fonts/TTF/"EndSectionSection "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "ru" #xkeymap0" Option "XkbVariant" "" Option "XkbOptions" "grp:shift_caps_toggle,grp_led:scroll"EndSection# **********************************************************************# Server flags section.# **********************************************************************Section "ServerFlags"# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence# (where n is 1 through 12). This allows clients to receive these key# events.# Option "DontVTSwitch"# Enables mode switching with xrandr# There is a report that this can cause Xorg not to work on some# video hardware, so default is commented-out...# but i want to use it in xorgwizard so leave on... Option "RandR" "on"# With this, Xorg won't talk to HAL to add evdev devices and you'll be back# with the old Xorg behavior (pre-7.4)... Option "AutoAddDevices" "false"# For no-Hal, kirk also suggests this...# Option "AllowMouseOpenFail" "true"# Xorg 7.4, Ubuntu Jaunty, CTRL-ALT-BACKSPACE is disabled by default... Option "DontZap" "false"EndSection#everything past here is auto-generated by Puppy's Xorg Wizard...Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard"EndSectionSection "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc102" Option "XkbLayout" "ru" #xkeymap0EndSectionSection "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" #mouse0protocol Option "Device" "/dev/mouse" #Option "Emulate3Buttons" #Option "Emulate3Timeout" "50" Option "ZAxisMapping" "4 5" #scrollwheelEndSectionSection "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" HorizSync 31.5-67 VertRefresh 50-75 #UseModes "Modes0" #monitor0usemodes Option "PreferredMode" "1280x1024" EndSection Section "Modes" Identifier "Modes0" #modes0modeline0EndSectionSection "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card0" Driver "vesa" #card0driver VendorName "InnoTek Systemberatung GmbH" BoardName "VirtualBox Graphics Adapter" BusID "PCI:0:2:0"EndSectionSection "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1280x1024" EndSubsectionEndSection#PuppyHardwareProfile=VirtualBox_VBE_BIOS